← Back to Enterprise Voice, Video, and Messaging Policy Security Requirements Guide

V-259930

CAT II (Medium)

The Session Border Controller (SBC) must be configured to only process signaling packets whose integrity is validated.

Rule ID

SV-259930r948776_rule

STIG

Enterprise Voice, Video, and Messaging Policy Security Requirements Guide

Version

V1R4

CCIs

CCI-001548

Discussion

The validation of signaling packet integrity is required to ensure the packet has not been altered in transit. Packets can be altered during uncontrollable network events, such as bit errors and packet truncation that would cause the packet to contain erroneous information. Packets containing detectable errors must not be processed. Packets can also be modified by a man-in-the-middle attack. The current Unified Capabilities Requirements (UCR) document specifies the hashing algorithm to be used during transmission.

Check Content

Verify the DISN NIPRNet IPVS SBC is configured to only process signaling packets whose integrity is validated. Inspect the configurations of the EBC to determine compliance with the requirement.

If the SBC does not validate the integrity of the received signaling packets, this is a finding. 

If the SBC is not configured to drop packets whose integrity is not validated, this is a finding.

NOTE: The VVoIP system may allow SIP and SRTP traffic encrypted and encapsulated on port 443 from cloud service providers.

Fix Text

Ensure the DISN NIPRNet IPVS SBC is configured to only process signaling packets whose integrity is validated. The current UCR document specifies the hashing algorithm to be used during transmission.

NOTE: The VVoIP system may allow SIP and SRTP traffic encrypted and encapsulated on port 443 from cloud service providers.