STIGhubSTIGhub
STIGsSearchCompareAbout

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • VPAT
  • DISA STIG Library
STIGs updated 2 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Cisco ASA NDM Security Technical Implementation Guide

V-239923

CAT II (Medium)

The Cisco ASA must be configured to generate an immediate real-time alert of all audit failure events requiring real-time alerts.

Rule ID

SV-239923r991812_rule

STIG

Cisco ASA NDM Security Technical Implementation Guide

Version

V2R4

CCIs

CCI-001858, CCI-003831

Discussion

It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).

Check Content

Review the Cisco ASA configuration to verify it is compliant with this requirement as shown in the example below.

logging trap critical
logging host NDM_INTERFACE 10.1.48.10

Note: The parameter critical can replaced with a lesser severity (i.e., error, warning, notice, informational). A logging list can be used as an alternative to the severity level.

If the Cisco ASA is not configured to generate an alert for all audit failure events, this is a finding.

Fix Text

Configure the Cisco ASA to send critical to emergency log messages to the syslog server as shown in the example below.

ASA(config)# logging host NDM_INTERFACE 10.1.48.10
ASA(config)# logging trap critical
ASA(config)# end

Note: The parameter critical can replaced with a lesser severity (i.e., error, warning, notice, informational).