Rule ID
SV-216722r1117237_rule
Version
V3R5
CCIs
Real-time multicast traffic can entail multiple large flows of data. An attacker can flood a network segment with multicast packets, over-using the available bandwidth and thereby creating a denial of service (DoS) condition. Hence, it is imperative that join messages are only accepted for authorized multicast groups.
Verify that the RP router is configured to filter PIM join messages for any undesirable multicast groups. In the example below, groups from 239.8.0.0/16 are not allowed. ip pim rp-address 10.2.2.2 ip pim accept-rp 10.2.2.2 FILTER_PIM_JOINS … … … ip access-list standard FILTER_PIM_JOINS deny 239.8.0.0 0.0.255.255 permit any ! If the RP is not configured to filter join messages received from the DR for any undesirable multicast groups, this is a finding.
Configure the RP to filter PIM join messages for any undesirable multicast groups as shown in the example below: R2(config)#ip access-list standard PIM_JOIN_FILTER R2(config-std-nacl)#deny 239.8.0.0 0.0.255.255 R2(config-std-nacl)#permit any R2(config-std-nacl)#exit R2(config)#ip pim accept-rp 10.2.2.2 PIM_JOIN_FILTER R2(config)#end