← Back to Network Infrastructure Policy Security Technical Implementation Guide

V-251366

CAT II (Medium)

When protecting the boundaries of a network, the firewall must be placed between the private network and the perimeter router and the Demilitarized Zone (DMZ).

Rule ID

SV-251366r853652_rule

STIG

Network Infrastructure Policy Security Technical Implementation Guide

Version

V10R7

CCIs

CCI-000262, CCI-002073

Discussion

The only way to mediate the flow of traffic between the inside network, the outside connection, and the DMZ is to place the firewall into the architecture in a manner that allows the firewall the ability to screen content for all three destinations.

Check Content

Review the network topology diagrams and visually inspect the firewall location to validate correct position on the network. 

If the firewall is not positioned between the perimeter router and the private network and between the perimeter router and the DMZ, this is a finding.

Exception: If the perimeter security for the enclave or B/C/P/S is provisioned via the JRSS, then this requirement is not applicable.

Fix Text

Move the firewall into the prescribed location to allow for enforcement of the Enclave Security Policy and allow for all traffic to be screened.