Rule ID
SV-221003r622190_rule
Version
V3R4
CCIs
Auditing and logging are key components of any security architecture. It is essential for security personnel to know what is being done or attempted to be done, and by whom, to compile an accurate risk assessment. Auditing the actions on network devices provides a means to recreate an attack or identify a configuration mistake on the device.
Review all ACLs used to filter traffic and verify that packets being dropped at interfaces via an ACL are logged as shown in the configuration below: ip access-list extended INGRESS_FILTER permit tcp any any established permit tcp host x.11.1.1 eq bgp host x.11.1.2 permit tcp host x.11.1.1 host x.11.1.2 eq bgp permit tcp any host x.11.1.5 eq www permit icmp host x.11.1.1 host x.11.1.2 echo permit icmp any any echo-reply … … … deny ip any any log If packets being dropped are not logged, this is a finding.
Configure ACLs to log packets that are dropped as shown in the example below: SW1(config)#ip access-list extended INGRESS_FILTER … … … SW1(config-ext-nacl)#deny ip any any log