STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Arista MLS EOS 4.X NDM Security Technical Implementation Guide

V-255948

CAT II (Medium)

The Arista network device must enforce approved authorizations for controlling the flow of management information within the network device based on information flow control policies.

Rule ID

SV-255948r991781_rule

STIG

Arista MLS EOS 4.X NDM Security Technical Implementation Guide

Version

V2R2

CCIs

CCI-001368CCI-004192

Discussion

A mechanism to detect and prevent unauthorized communication flow must be configured or provided as part of the system design. If management information flow is not enforced based on approved authorizations, the network device may become compromised. Information flow control regulates where management information is allowed to travel within a network device. The flow of all management information must be monitored and controlled so it does not introduce any unacceptable risk to the network device or data. Application-specific examples of enforcement occur in systems that employ rule sets or establish configuration settings that restrict information system services or message-filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Applications providing information flow control must be able to enforce approved authorizations for controlling the flow of management information within the system in accordance with applicable policy.

Check Content

Verify the Arista network device is configured with access control lists to control the flow of management information.

Step 1: Verify SSH has an inbound ACL applied as shown in the example below.

sh run | sec management ssh
 ip access-group MGMT_NETWORK in

Step 2: Verify the ACL permits only hosts from the management network to access the device.

sh run | sec access-list MGMT_NETWORK
 ip access-list MGMT_NETWORK
   10 permit ip 10.1.12.0/24 any
   20 deny ip any any log

If the Arista network device is not configured to enforce approved authorizations for controlling the flow of management information within the device based on control policies, this is a finding.

Fix Text

Step 1: Configure an ACL for SSH access using the following commands:

switch(config)#ip access-list MGMT_NETWORK
switch(config-acl-MGMT_NETWORK)#10 permit ip 10.1.12.0/24 any
switch(config-acl-MGMT_NETWORK)#20 deny ip any any log
switch(config-acl-MGMT_NETWORK)#exit

Step 2: Apply the ACL to management ssh.

switch(config)#management ssh 
switch(config-mgmt-ssh)#ip access-group MGMT_NETWORK in
switch(config-mgmt-ssh)#exit