STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated just now
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to RUCKUS ICX Router Security Technical Implementation Guide

V-273613

CAT II (Medium)

The RUCKUS ICX management network gateway must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit.

Rule ID

SV-273613r1110924_rule

STIG

RUCKUS ICX Router Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-001097

Discussion

When the production network is managed in-band or out-of-band (OOBM), the management network could be housed at a NOC that is located remotely at single or multiple interconnected sites. NOC interconnectivity, as well as connectivity between the NOC and the managed network, must be enabled using IPsec tunnels or dedicated circuits to provide the separation and integrity of the managed traffic.

Check Content

This requirement is not applicable for the DODIN Backbone.

Review the network topology diagram to determine connectivity between the managed network and the NOC.

Review the management network gateway router configuration to validate the path and interface that the management traffic traverses.

If management traffic is not transported between the managed network and the NOC via dedicated circuit, this is a finding.

Fix Text

This requirement is not applicable for the DODIN Backbone.

Deploy a dedicated circuit to transport management traffic between the managed network and the NOC.