STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Cisco IOS Router RTR Security Technical Implementation Guide

V-216600

CAT II (Medium)

The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS).

Rule ID

SV-216600r1117236_rule

STIG

Cisco IOS Router RTR Security Technical Implementation Guide

Version

V3R4

CCIs

CCI-001368

Discussion

Advertisement of routes by an autonomous system for networks that do not belong to any of its customers pulls traffic away from the authorized network. This causes a denial of service (DoS) on the network that allocated the block of addresses and may cause a DoS on the network that is inadvertently advertising it as the originator. It is also possible that a misconfigured or compromised router within the GIG IP core could redistribute IGP routes into BGP, thereby leaking internal routes.

Check Content

This requirement is not applicable for the DODIN Backbone.

Step 1: Verify that a prefix list has been configured containing prefixes belonging to customers as well as the local AS as shown in the example below.

ip prefix-list CE_PREFIX_ADVERTISEMENTS seq 5 permit x.13.1.0/24 le 32
ip prefix-list CE_PREFIX_ADVERTISEMENTS seq 10 permit x.13.2.0/24 le 32
ip prefix-list CE_PREFIX_ADVERTISEMENTS seq 15 permit x.13.3.0/24 le 32
ip prefix-list CE_PREFIX_ADVERTISEMENTS seq 20 permit x.13.4.0/24 le 32
…
…
…
ip prefix-list CE_PREFIX_ADVERTISEMENTS seq 80 deny 0.0.0.0/0 ge 8

Step 2: Verify that the prefix lists has been applied to all CE peers as shown in the example below.

router bgp 64512
 no synchronization
 bgp log-neighbor-changes
 neighbor x.12.4.14 remote-as 64514
 neighbor x.12.4.14 prefix-list CE_PREFIX_ADVERTISEMENTS out
 neighbor x.12.4.16 remote-as 64516
 neighbor x.12.4.16 prefix-list CE_PREFIX_ADVERTISEMENTS out

If the router is not configured to reject outbound route advertisements that do not belong to any customers or the local AS, this is a finding.

Note: This check is NA for JRSS systems.

Fix Text

This requirement is not applicable for the DODIN Backbone.

Step 1: Configure a prefix list for containing all customer and local AS prefixes as shown in the example below.

R1(config)#ip prefix-list CE_PREFIX_ADVERTISEMENTS permit x.13.1.0/24 le 32
R1(config)#ip prefix-list CE_PREFIX_ADVERTISEMENTS permit x.13.2.0/24 le 32
R1(config)#ip prefix-list CE_PREFIX_ADVERTISEMENTS permit x.13.3.0/24 le 32
R1(config)#ip prefix-list CE_PREFIX_ADVERTISEMENTS permit x.13.4.0/24 le 32
…
…
…
R1(config)#ip prefix-list CE_PREFIX_ADVERTISEMENTS deny 0.0.0.0/0 ge 8