STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 1 hour ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Juniper SRX SG VPN Security Technical Implementation Guide

V-66655

CAT II (Medium)

The Juniper SRX Services Gateway VPN must specify Perfect Forward Secrecy (PFS).

Rule ID

SV-81145r1_rule

STIG

Juniper SRX SG VPN Security Technical Implementation Guide

Version

V1R2

CCIs

CCI-000366

Discussion

PFS generates each new encryption key independently from the previous key. Without PFS, compromise of one key will compromise all communications. The phase 2 (Quick Mode) Security Association (SA) is used to create an IPsec session key. Hence, its rekey or key regeneration procedure is very important. The phase 2 rekey can be performed with or without Perfect Forward Secrecy (PFS). With PFS, every time a new IPsec Security Association is negotiated during the Quick Mode, a new Diffie-Hellman (DH) exchange occurs. The new DH shared secret will be included with original keying material (SYKEID_d, initiator nonce, and responder nonce from phase 1) for generating a new IPsec session key. If PFS is not used, the IPsec session key will always be completely dependent on the original keying material from the Phase-1. Hence, if an older key is compromised at any time, it is possible that all new keys may be compromised. The DH exchange is performed in the same manner as was done in phase 1 (Main or Aggressive Mode). However, the phase 2 exchange is protected by encrypting the phase 2 packets with the key derived from the phase 1 negotiation. Because DH negotiations during phase 2 are encrypted, the new IPsec session key has an added element of secrecy.

Check Content

Examine all IPsec profiles to verify PFS is enabled.

[edit]
show security ipsec policy

If PFS is not configured, this is a finding.

Fix Text

Configure the VPN gateway to ensure PFS is enabled. The following commands configure an IPsec policy, enabling PFS using Diffie-Hellman group 14 and associates the IPsec proposal configured in the previous example.

[edit]
set security ipsec policy <IPSEC-POLICY> perfect-forward-secrecy keys group14
set security ipsec policy <IPSEC-POLICY> proposals <IPSEC-PROPOSAL>