STIGhubSTIGhub
STIGsSearchCompareAbout

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • VPAT
  • DISA STIG Library
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Amazon Linux 2023 Security Technical Implementation Guide

V-274050

CAT II (Medium)

Amazon Linux 2023 must be configured so that all network connections associated with SSH traffic are terminated after 10 minutes of becoming unresponsive.

Rule ID

SV-274050r1120138_rule

STIG

Amazon Linux 2023 Security Technical Implementation Guide

Version

V1R3

CCIs

CCI-001133, CCI-002361, CCI-002891

Discussion

Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at Amazon Linux 2023 level, and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that Amazon Linux 2023 terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Satisfies: SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000395-GPOS-00175

Check Content

Verify Amazon Linux 2023 has the "ClientAliveInterval" variable set to a value of "600" or less by performing the following command:

$ sudo /usr/sbin/sshd -dd 2>&1 | awk '/filename/ {print $4}' | tr -d '\r' | tr '\n' ' ' | xargs sudo grep -iH '^\s*clientaliveinterval'
/etc/ssh/sshd_config.d/91-ClientAliveInterval.conf:ClientAliveInterval 600

If "ClientAliveInterval" does not exist, does not have a value of "600" or less in "/etc/ssh/sshd_config" or a dropfile in "/etc/ssh/sshd_config.d", or is commented out, this is a finding.

Fix Text

Configure Amazon Linux 2023 SSH server to terminate a user session automatically after the SSH client has been unresponsive for 10 minutes.

Note: This setting must be applied in conjunction with "ClientAliveCountMax 1" to function correctly.

Modify or append the following lines in the "/etc/ssh/sshd_config" or a dropfile in "/etc/ssh/sshd_config.d" file:

ClientAliveInterval 600

For the changes to take effect, the SSH daemon must be restarted.

$ sudo systemctl restart sshd.service