STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Cisco IOS XR Router RTR Security Technical Implementation Guide

V-217006

CAT II (Medium)

The Cisco perimeter router must be configured to block all packets with any IP options.

Rule ID

SV-217006r945859_rule

STIG

Cisco IOS XR Router RTR Security Technical Implementation Guide

Version

V3R3

CCIs

CCI-002403

Discussion

Packets with IP options are not fast switched and henceforth must be punted to the router processor. Hackers who initiate denial-of-service (DoS) attacks on routers commonly send large streams of packets with IP options. Dropping the packets with IP options reduces the load of IP options packets on the router. The end result is a reduction in the effects of the DoS attack on the router and on downstream routers.

Check Content

This requirement is not applicable for the DODIN Backbone.

In Cisco IOS XR, all IPv4 packets with any header option other than the "source-route" header options are dropped. By default, ipv4 source routing is disabled. Verify that the following command is not configured: ipv4 source-route

If the router is not configured to drop all packets with IP option source routing, this is a finding.

Fix Text

This requirement is not applicable for the DODIN Backbone.

Configure the router to drop all packets with IP option source routing.

RP/0/0/CPU0:R3(config)#no ipv4 source-route