STIGhubSTIGhub
STIGsSearchCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to HP FlexFabric Switch L2S Security Technical Implementation Guide

V-66061

CAT II (Medium)

The HP FlexFabric Switch must provide the capability for authorized users to remotely view, in real time, all content related to an established user session from a component separate from the HP FlexFabric Switch.

Rule ID

SV-80551r1_rule

STIG

HP FlexFabric Switch L2S Security Technical Implementation Guide

Version

V1R3

CCIs

CCI-001920

Discussion

Without the capability to remotely view/hear all content related to a user session, investigations into suspicious user activity would be hampered. Real-time monitoring allows authorized personnel to take action before additional damage is done. The ability to observe user sessions as they are happening allows for interceding in ongoing events that after-the-fact review of captured content would not allow.

Check Content

Verify that the HP FlexFabric Switch is capable of capturing ingress and egress packets from any designated switch port for the purpose of remotely monitoring a specific user session.

If the HP FlexFabric Switch is not capable of capturing ingress and egress packets from a designated switch port for the purpose of remotely monitoring a specific user session, this is a finding.

Fix Text

Configure the HP FlexFabric Switch to remotely capture ingress and egress packets from any designated switch port for the purpose of monitoring a specific user session as shown in the following example:

[HP]mirroring-group 1 remote-source 

[HP]mirroring-group 1 mirroring-port GigabitEthernet 1/0/1 both

[HP]mirroring-group 1 monitor-port GigabitEthernet 1/0/2