← Back to VMware vSphere 7.0 Virtual Machine Security Technical Implementation Guide

V-256458

CAT III (Low)

Unauthorized CD/DVD devices must be disconnected on the virtual machine (VM).

Rule ID

SV-256458r959010_rule

STIG

VMware vSphere 7.0 Virtual Machine Security Technical Implementation Guide

Version

V1R4

CCIs

CCI-000366

Discussion

Ensure no device is connected to a virtual machine if it is not required. For example, floppy, serial, and parallel ports are rarely used for virtual machines in a data center environment, and CD/DVD drives are usually connected only temporarily during software installation.

Check Content

From the vSphere Client, right-click the Virtual Machine and go to "Edit Settings".

Review the VM's hardware and verify no CD/DVD drives are connected.

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:

Get-VM | Get-CDDrive | Where {$_.extensiondata.connectable.connected -eq $true} | Select Parent,Name

If a virtual machine has a CD/DVD drive connected other than temporarily, this is a finding.

Fix Text

From the vSphere Client, right-click the Virtual Machine and go to "Edit Settings".

Select the CD/DVD drive and uncheck "Connected" and "Connect at power on" and remove any attached ISOs.

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:

Get-VM "VM Name" | Get-CDDrive | Set-CDDrive -NoMedia