STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Red Hat Enterprise Linux 7 Security Technical Implementation Guide

V-204479

CAT II (Medium)

The Red Hat Enterprise Linux operating system must be configured so that all system device files are correctly labeled to prevent unauthorized modification.

Rule ID

SV-204479r991589_rule

STIG

Red Hat Enterprise Linux 7 Security Technical Implementation Guide

Version

V3R15

CCIs

CCI-000318CCI-000368CCI-001812CCI-001813CCI-001814

Discussion

If an unauthorized or modified device is allowed to exist on the system, there is the possibility the system may perform unintended or unauthorized operations.

Check Content

Verify that all system device files are correctly labeled to prevent unauthorized modification.

List all device files on the system that are incorrectly labeled with the following commands:

Note: Device files are normally found under "/dev", but applications may place device files in other directories and may necessitate a search of the entire system.

#find /dev -context *:device_t:* \( -type c -o -type b \) -printf "%p %Z\n"

#find /dev -context *:unlabeled_t:* \( -type c -o -type b \) -printf "%p %Z\n"

Note: There are device files, such as "/dev/vmci", that are used when the operating system is a host virtual machine. They will not be owned by a user on the system and require the "device_t" label to operate. These device files are not a finding.

If there is output from either of these commands, other than already noted, this is a finding.

Fix Text

Run the following command to determine which package owns the device file:

# rpm -qf <filename>

The package can be reinstalled from a yum repository using the command:

# sudo yum reinstall <packagename>

Alternatively, the package can be reinstalled from trusted media using the command:

# sudo rpm -Uvh <packagename>