STIGhubSTIGhub
STIGsSearchCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to VMware vRealize Operations Manager 6.x SLES Security Technical Implementation Guide

V-239564

CAT II (Medium)

The SLES for vRealize must terminate all network connections associated with a communications session at the end of the session, or as follows: for in-band management sessions (privileged sessions), the session must be terminated after 10 minutes of inactivity; and for user sessions (non-privileged session), the session must be terminated after 15 minutes of inactivity, except to fulfill documented and validated mission requirements.

Rule ID

SV-239564r662405_rule

STIG

VMware vRealize Operations Manager 6.x SLES Security Technical Implementation Guide

Version

V2R2

CCIs

CCI-001133

Discussion

Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that SLES for vRealize terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session.

Check Content

Check for the existence of the "/etc/profile.d/tmout.sh" file:

# ls -al /etc/profile.d/tmout.sh

Check for the presence of the "TMOUT" variable:

# grep TMOUT /etc/profile.d/tmout.sh

The value of "TMOUT" should be set to "900" seconds (15 minutes).

If the file does not exist, or the "TMOUT" variable is not set to "900", this is a finding.

Fix Text

Ensure the file exists and is owned by "root". If the files does not exist, use the following commands to create the file:

# touch /etc/profile.d/tmout.sh
# chown root:root /etc/profile.d/tmout.sh
# chmod 644 /etc/profile.d/tmout.sh

Edit the file "/etc/profile.d/tmout.sh", and add the following lines: 

TMOUT=900
readonly TMOUT
export TMOUT
mesg n 2>/dev/null