STIGhubSTIGhub
STIGsSearchCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to HP FlexFabric Switch RTR Security Technical Implementation Guide

V-66115

CAT II (Medium)

The HP FlexFabric Switch must enforce that Interior Gateway Protocol (IGP) instances configured on the out-of-band management gateway only peer with their own routing domain.

Rule ID

SV-80605r1_rule

STIG

HP FlexFabric Switch RTR Security Technical Implementation Guide

Version

V1R2

CCIs

CCI-001414

Discussion

If the gateway router is not a dedicated device for the out-of-band management network, implementation of several safeguards for containment of management and production traffic boundaries must occur. Since the managed and management network are separate routing domains, configuration of separate Interior Gateway Protocol routing instances is critical on the router to segregate traffic from each network.

Check Content

Review the configuration to verify the management interface belongs to a different OSPF instance (process) than the production network. If the management interface does not belong to a different OSPF instance, this is a finding.

Fix Text

If OSPF is used for the management network, configure the management interface to belong to a different OSPF instance than the production network.