← Back to Red Hat Enterprise Linux 7 Security Technical Implementation Guide

V-204426

CAT II (Medium)

The Red Hat Enterprise Linux operating system must disable account identifiers (individuals, groups, roles, and devices) if the password expires.

Rule ID

SV-204426r982189_rule

STIG

Red Hat Enterprise Linux 7 Security Technical Implementation Guide

Version

V3R15

CCIs

CCI-000795

Discussion

Inactive identifiers pose a risk to systems and applications because attackers may exploit an inactive identifier and potentially obtain undetected access to the system. Owners of inactive accounts will not notice if unauthorized access to their user account has been obtained. Operating systems need to track periods of inactivity and disable application identifiers after 35 days of inactivity.

Check Content

If passwords are not being used for authentication, this is Not Applicable.

Verify the operating system disables account identifiers (individuals, groups, roles, and devices) after the password has expired with the following command:

     # grep -i inactive /etc/default/useradd
     INACTIVE=35

If "INACTIVE" is set to "-1", a value greater than "35", is commented out, or is not defined, this is a finding.

Fix Text

Configure the operating system to disable account identifiers (individuals, groups, roles, and devices) 35 days after the password has expired.

Add the following line to "/etc/default/useradd" (or modify the line to have the required value):

     INACTIVE=35

DOD recommendation is 35 days, but a lower value is acceptable. The value "-1" will disable this feature, and "0" will disable the account immediately after the password expires.