STIGhubSTIGhub
STIGsSearchCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 5 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Zebra Android 11 COBO Security Technical Implementation Guide

V-252858

CAT III (Low)

Zebra Android 11 must be configured to disable Bluetooth or configured via User Based Enforcement (UBE) to allow Bluetooth for only Headset Profile (HSP), HandsFree Profile (HFP), and Serial Port Profile (SPP).

Rule ID

SV-252858r959010_rule

STIG

Zebra Android 11 COBO Security Technical Implementation Guide

Version

V1R4

CCIs

CCI-000366, CCI-001761

Discussion

Some Bluetooth profiles provide the capability for remote transfer of sensitive DoD data without encryption or otherwise do not meet DoD IT security policies and therefore should be disabled. SFR ID: FMT_SMF_EXT.1.1 #18h

Check Content

Determine if the AO has approved the use of Bluetooth at the site.

If the AO has not approved the use of Bluetooth, verify Bluetooth has been disabled:

On the EMM console, do the following:
1. Open "User restrictions on parent" section.
2. Verify that "Disallow Bluetooth" is toggled to "On".

On the Android 11 device, do the following:
1. Go to Settings >> Connected Devices >> Connection Preferences >> Bluetooth.
2. Ensure that it is set to "Off" and cannot be toggled to "On".

If the AO has approved the use of Bluetooth, on the Zebra Android 11 device do the following:
1. Go to Settings >> Connected Devices.
2. Verify only approved Bluetooth connected devices using approved profiles are listed.

If the AO has not approved the use of Bluetooth, and Bluetooth use is not disabled via an EMM-managed device policy, this is a finding.

If the AO has approved the use of Bluetooth, and Bluetooth devices using unauthorized Bluetooth profiles are listed on the device under "Connected devices", this is a finding.

Fix Text

Configure the Zebra Android 11 device to disable Bluetooth or if the AO has approved the use of Bluetooth (for example, for car hands-free use), train the user to connect to only authorized Bluetooth devices using only HSP, HFP, or SPP profiles.

To disable Bluetooth use the following procedure:
On the EMM Console:
1. Open "User restrictions on parent" section.
2. Toggle "Disallow Bluetooth" to "On".

The user training requirement is satisfied in requirement ZEBR-11-008700.