← Back to Akamai KSD Service Impact Level 2 ALG Security Technical Implementation Guide

V-76441

CAT III (Low)

Kona Site Defender providing content filtering must be configured to integrate with a system-wide intrusion detection system.

Rule ID

SV-91137r1_rule

STIG

Akamai KSD Service Impact Level 2 ALG Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-002656

Discussion

Without coordinated reporting between separate devices, it is not possible to identify the true scale and possible target of an attack. Integration of the ALG with a system-wide intrusion detection system supports continuous monitoring and incident response programs. This requirement applies to monitoring at internal boundaries using TLS gateways, web content filters, email gateways, and other types of ALGs. ALGs can work as part of the network monitoring capabilities to off-load inspection functions from the external boundary IDPS by performing more granular content inspection of protocols at the upper layers of the OSI reference model.

Check Content

If the SIEM delivery option has been purchased, confirm that the Kona Site Defender SIEM integration is enabled:

1. Log in to the Akamai Luna Portal (https://control.akamai.com).
2. Click the "Configure" tab.
3. Under the "Security" section, select "Security Configuration".
4. If prompted, select "Site Defender" and then "Continue".
5. Open the security configuration for which SIEM data is required.
6. Scroll down to the SIEM Integration section and verify that "Allow data collection for SIEM" is enabled.

If "Allow data collection for SIEM field" is not enabled, this is a finding.

Fix Text

Configure Kona Site Defender to deliver security event traffic to the SIEM:

1. Log in to the Akamai Luna Portal (https://control.akamai.com).
2. Click the "Configure" tab.
3. Under the "Security" section, select "Security Configuration".
4. If prompted, select the product with which you would like to work and click "Continue".
5. Open the security configuration for which you want SIEM data.
6. Scroll down to the SIEM Integration section.
7. In the "Allow data collection for SIEM" field, click "Yes".
8. Choose the firewall policies for which you want to export data. Enable SIEM integration for:
   - ALL Firewall policies if you want to send SIEM data for events that violate any/all firewall policies within the security configuration.
   - The following firewall policies if you want data regarding one or more specific firewall policies. In the drop down list, choose the policies you want.
9. Skip the SIEM Event Version field for now.
10. Copy the number in the Security Config ID field. You’ll need it in a minute.
11. Push security configuration changes to the production network.
 - On the upper right of the Security Configuration page, click the Activate button. Under Network, choose Production and click Activate