STIGhubSTIGhub
STIGsSearchCompareAbout

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • VPAT
  • DISA STIG Library
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to A10 Networks ADC ALG Security Technical Implementation Guide

V-237056

CAT II (Medium)

The A10 Networks ADC must enable logging of Denial of Service (DoS) attacks.

Rule ID

SV-237056r971533_rule

STIG

A10 Networks ADC ALG Security Technical Implementation Guide

Version

V2R2

CCIs

CCI-002664

Discussion

Without an alert, security personnel may be unaware of major detection incidents that require immediate action, and this delay may result in the loss or compromise of information. CJCSM 6510.01B, "Cyber Incident Handling Program", lists nine Cyber Incident and Reportable Event Categories. DoD has determined that categories identified by CJCSM 6510.01B Major Indicators (category 1, 2, 4, or 7 detection events) will require an alert when an event is detected. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The device must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel. The A10 Networks ADC must be configured to generate a log message when IP anomalies and DoS attacks are detected.

Check Content

Review the device configuration.

The following command displays the device configuration and filters the output on the string "log":
show run | inc log

If the output does not include the command "system attack log", this is a finding.

Fix Text

The following command enables logging of DDoS attacks:
system attack log