STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 6 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Tri-Lab Operating System Stack (TOSS) 5 Security Technical Implementation Guide

V-282700

CAT II (Medium)

TOSS 5 must not forward Internet Protocol version 6 (IPv6) source-routed packets.

Rule ID

SV-282700r1201352_rule

STIG

Tri-Lab Operating System Stack (TOSS) 5 Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-000366

Discussion

Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when forwarding is enabled and the system is functioning as a router.

Check Content

Verify TOSS 5 does not accept IPv6 source-routed packets.

Note: If IPv6 is disabled on the system, this requirement is not applicable.

Check the value of the accept source route variable using the following command:

$ sudo sysctl net.ipv6.conf.all.accept_source_route

net.ipv6.conf.all.accept_source_route = 0

If the returned line does not have a value of "0", or a line is not returned, this is a finding.

Fix Text

Configure TOSS 5 to not forward IPv6 source-routed packets.

Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:

net.ipv6.conf.all.accept_source_route = 0

Load settings from all system configuration files using the following command:

$ sudo sysctl --system