← Back to VMware vSphere 8.0 ESXi Security Technical Implementation Guide

V-258733

CAT II (Medium)

The ESXi must produce audit records containing information to establish what type of events occurred.

Rule ID

SV-258733r933260_rule

STIG

VMware vSphere 8.0 ESXi Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-000130, CCI-000171

Discussion

Without establishing what types of events occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Satisfies: SRG-OS-000037-VMM-000150, SRG-OS-000063-VMM-000310

Check Content

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Select the "Config.HostAgent.log.level" value and verify it is set to "info".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Config.HostAgent.log.level

If the "Config.HostAgent.log.level" setting is not set to "info", this is a finding.

Note: Verbose logging level is acceptable for troubleshooting purposes.

Fix Text

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Click "Edit". Select the "Config.HostAgent.log.level" value and configure it to "info".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Config.HostAgent.log.level | Set-AdvancedSetting -Value "info"