← Back to Ivanti Connect Secure NDM Security Technical Implementation Guide

V-258603

CAT II (Medium)

The ICS must be configured to authenticate Network Time Protocol (NTP) sources using authentication that is cryptographically based.

Rule ID

SV-258603r961506_rule

STIG

Ivanti Connect Secure NDM Security Technical Implementation Guide

Version

V2R3

CCIs

CCI-001967

Discussion

If Network Time Protocol is not authenticated, an attacker can introduce a rogue NTP server. This rogue server can then be used to send incorrect time information to network devices, which will make log timestamps inaccurate and affect scheduled actions. NTP authentication is used to prevent this tampering by authenticating the time source.

Check Content

In the ICS Web UI, navigate to System >> Status >> Dashboard.
1. Click the "Overview" tab.
2. Under "Appliance Details" and "System Date and Time", select "Edit".
3. Verify the "Use Pool of NTP servers" is checked with NTP server IPs defined.
4. Verify the NTP server IP/hostname is defined with a key.

If the ICS does not authenticate NTP sources using authentication that is cryptographically based, this is a finding.

Fix Text

In the ICS Web UI, navigate to System >> Status >> Dashboard.
1. Click the "Overview" tab.
2. Under "Appliance Details" and "System Date and Time" select "Edit".
3. Select the Time Zone to use - DOD may require GMT.
4. Select "Use Pool of NTP servers".
5. Enter the IP/hostname of each NTP server in the "NTP Server 1", "NTP Server 2", etc.
6. Under the key section input the key in the following format: <keynumber> <algorithm> <key>
For example, it would be entered like this: 1 SHA1 NtPKey123.
Note: there must be a space between each section of <keynumber> <algorithm> <key>
7. Click "Save Changes".
8. Navigate to System >> Log/Monitoring >> Events.
9. Ensure an event log stating the time sync is successful.