STIGhubSTIGhub
STIGsSearchCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Honeywell Android 13 COBO Security Technical Implementation Guide

V-274319

CAT II (Medium)

Honeywell Android 13 must be configured to enforce that Wi-Fi Sharing is disabled.

Rule ID

SV-274319r1100410_rule

STIG

Honeywell Android 13 COBO Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-000366

Discussion

Wi-Fi Sharing is an optional configuration of Wi-Fi Tethering/Mobile Hotspot, which allows the device to share its Wi-Fi connection with other wirelessly connected devices instead of its mobile (cellular) connection. Wi-Fi Sharing grants the "other" device access to a corporate Wi-Fi network and may possibly bypass the network access control mechanisms. This risk can be partially mitigated by requiring the use of a preshared key for personal hotspots. SFR ID: FMT_SMF_EXT.1.1 #47

Check Content

Review device configuration settings to confirm Wi-Fi Sharing is disabled. 
 
Mobile Hotspot must be enabled to enable Wi-Fi Sharing. If the authorizing official (AO) has not approved Mobile Hotspot, and it has been verified as disabled on the EMM console, no further action is needed. 

If Mobile Hotspot is being used, use the following procedure to verify that Wi-Fi Sharing is disabled: 

On the EMM console:

COBO:

1. Open "Set user restrictions".
2. Verify that "Disallow sharing admin configured Wi-Fi" is set to "ON".

COPE:

1. Open "Set user restrictions on parent".
2. Verify that "Disallow sharing admin configured Wi-Fi" is set to "ON".

If on the EMM console, "Disallow sharing admin configured Wi-Fi" is not enabled, this is a finding.

Fix Text

Configure the Honeywell Android 13 device to disable Wi-Fi Sharing.
 
Mobile Hotspot must be enabled to enable Wi-Fi Sharing. If the AO has not approved Mobile Hotspot, and it has been disabled on the EMM console, no further action is needed. 

If Mobile Hotspot is being used, use the following procedure to disable Wi-Fi Sharing: 

On the EMM console:

COBO:

1. Open "Set user restrictions".
2. Toggle "Disallow sharing admin configured Wi-Fi" to "ON".

COPE:

1. Open "Set user restrictions on parent".
2. Toggle "Disallow sharing admin configured Wi-Fi" to "ON".