← Back to Honeywell Android 13 COPE Security Technical Implementation Guide

V-274427

CAT II (Medium)

Honeywell Android 13 must be configured to disable all data signaling over [assignment: list of externally accessible hardware ports (for example, USB)].

Rule ID

SV-274427r1100851_rule

STIG

Honeywell Android 13 COPE Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-002235

Discussion

If a user is able to configure the security setting, the user could inadvertently or maliciously set it to a value that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information. SFR ID: FMT_MOF_EXT.1.2 #24

Check Content

Review the device configuration to confirm that the USB port is disabled except for charging the device.

On the EMM console:

1. Open "Set user restrictions".
2. Verify that "Enable USB" is toggled to "OFF".
 
If on the EMM console the USB port is not disabled, this is a finding.

Fix Text

Configure the Honeywell Android 13 device to disable the USB port (except for charging the device).

COPE and COBO:

On the EMM console:

1. Open "Set user restrictions".
2. Toggle "Enable USB" to "OFF".