V-260594

Discussion

It is critical that when the operating system is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include: software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode. When availability is an overriding concern, other approved actions in response to an audit failure are as follows: 1. If the failure was caused by the lack of audit record storage capacity, the operating system must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner. 2. If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, the operating system must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.

Check Content

Verify Ubuntu 22.04 LTS takes the appropriate action when the audit storage volume is full by using the following command:  
  
     $ sudo grep -i disk_full_action /etc/audit/auditd.conf 
     disk_full_action = HALT 
  
If "disk_full_action" is not set to "HALT", "SYSLOG", or "SINGLE", is commented out, or is missing, this is a finding.