STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 3 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Nutanix AOS 5.20.x OS Security Technical Implementation Guide

V-254182

CAT III (Low)

Nutanix AOS must compare internal information system clocks at least every 24 hours with a server synchronized to one of the redundant United States Naval Observatory (USNO) time servers, or a time server designated for the appropriate DoD network (NIPRNet/SIPRNet), and/or the Global Positioning System (GPS).

Rule ID

SV-254182r982208_rule

STIG

Nutanix AOS 5.20.x OS Security Technical Implementation Guide

Version

V1R2

CCIs

CCI-001891CCI-002046

Discussion

Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations must consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints). Satisfies: SRG-OS-000355-GPOS-00143, SRG-OS-000356-GPOS-00144

Check Content

Confirm Nutanix AOS is running the NTP service.

# sudo ps -ef | grep ntp
ntp       7447     1  0 Aug17 ?        00:00:05 /usr/sbin/ntpd -u ntp:ntp -g

If the NTP service is not running, this is a finding.

Next Check the ntp.conf file for the "maxpoll" option setting.

$ sudo grep maxpoll /etc/ntp.conf
server #.#.#.# maxpoll 10

If the option is set to "17" or is not set, this is a finding.

Fix Text

Log in to the Nutanix CVM.

Run the following command to add a list of DoD Approved NTP servers:  $ ncli cluster add-to-ntp-servers servers=IP_1,IP_2,IP_3