STIGhubSTIGhub
STIGsSearchCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 5 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Juniper Router RTR Security Technical Implementation Guide

V-217040

CAT II (Medium)

The Juniper perimeter router must be configured to block all packets with any IP options.

Rule ID

SV-217040r945859_rule

STIG

Juniper Router RTR Security Technical Implementation Guide

Version

V3R2

CCIs

CCI-002403

Discussion

Packets with IP options are not fast switched and henceforth must be punted to the router processor. Hackers who initiate denial-of-service (DoS) attacks on routers commonly send large streams of packets with IP options. Dropping the packets with IP options reduces the load of IP options packets on the router. The end result is a reduction in the effects of the DoS attack on the router and on downstream routers.

Check Content

This requirement is not applicable for the DoDIN Backbone.

Review the router configuration to determine if it will block all packets with IP options.

firewall {
    family inet {
        filter INBOUND_FILTER {
            term DROP_IPOPTIONS {
                from {
                    ip-options any;
                }
                then {
                    syslog;
                    discard;
                }
            }
            term BLOCK_BOGONS {
                from {
                    source-prefix-list {
                        BOGON_PREFIXES;
                    }
                }
                then {
                    syslog;
                    discard;
                }
            }
            term ALLOW_ABC {
            …
            …
            …
            term DENY_ALL_OTHER {
                then {
                    log;
                    syslog;
                    reject;
                }
            }
        }

If the router is not configured to drop all packets with IP options, this is a finding.

Fix Text

This requirement is not applicable for the DoDIN Backbone.

Configure the router to drop all packets with IP options.

[edit firewall family inet filter INBOUND_FILTER]
set term DROP_IPOPTIONS from ip-options any
set term DROP_IPOPTIONS then discard
insert term DROP_IPOPTIONS before  term BLOCK_BOGONS