STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 4 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Oracle HTTP Server 12.1.3 Security Technical Implementation Guide

V-221531

CAT II (Medium)

OHS must have the SSLCipherSuite directive enabled to maintain the confidentiality of controlled information during transmission through the use of an approved TLS version.

Rule ID

SV-221531r961632_rule

STIG

Oracle HTTP Server 12.1.3 Security Technical Implementation Guide

Version

V2R3

CCIs

CCI-002418

Discussion

Transport Layer Security (TLS) is a required transmission protocol for a web server hosting controlled information. The use of TLS provides confidentiality of data in transit between the web server and client. FIPS 140-2 approved TLS versions must be enabled and non-FIPS-approved SSL versions must be disabled. NIST SP 800-52 defines the approved TLS versions for government applications.

Check Content

1. Open every .conf file (e.g., ssl.conf) included in $DOMAIN_HOME/config/fmwconfig/components/OHS/<componentName>/httpd.conf with an editor that requires an SSL-enabled "<VirtualHost>" directive.

2. Search for the "SSLCipherSuite" directive at the OHS server, virtual host, and/or directory configuration scopes.

3. If the directive is omitted or set improperly, this is a finding.

Fix Text

1. Open every .conf file (e.g., ssl.conf) included in $DOMAIN_HOME/config/fmwconfig/components/OHS/<componentName>/httpd.conf with an editor that requires an SSL-enabled "<VirtualHost>" directive.

2. Search for the "SSLCipherSuite" directive at the OHS server, virtual host, and/or directory configuration scopes.

3. Set the "SSLCipherSuite" directive to "SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_AES_128_CBC_SHA,SSL_RSA_WITH_AES_256_CBC_SHA,RSA_WITH_AES_128_CBC_SHA256,RSA_WITH_AES_256_CBC_SHA256,RSA_WITH_AES_128_GCM_SHA256,RSA_WITH_AES_256_GCM_SHA384,ECDHE_ECDSA_WITH_AES_128_CBC_SHA,ECDHE_ECDSA_WITH_AES_256_CBC_SHA,ECDHE_ECDSA_WITH_AES_128_CBC_SHA256,ECDHE_ECDSA_WITH_AES_256_CBC_SHA384,ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,ECDHE_RSA_WITH_AES_128_CBC_SHA,ECDHE_RSA_WITH_AES_256_CBC_SHA", add the directive if it does not exist.

Note: Ciphers may be removed from the list above per the organization's requirements or if vulnerabilities are found with a specific cipher.