← Back to VMware vSphere 8.0 ESXi Security Technical Implementation Guide

V-258787

CAT II (Medium)

The ESXi host must enable audit logging.

Rule ID

SV-258787r933422_rule

STIG

VMware vSphere 8.0 ESXi Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-000366

Discussion

ESXi offers both local and remote audit recordkeeping to meet the requirements of the NIAP Virtualization Protection Profile and Server Virtualization Extended Package. Local records are stored on any accessible local or VMFS path. Remote records are sent to the global syslog servers configured elsewhere. To operate in the NIAP validated state, ESXi must enable and properly configure this audit system. This system is disabled by default. Note: Audit records can be viewed locally via the "/bin/viewAudit" utility over SSH or at the ESXi shell.

Check Content

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Select the "Syslog.global.auditRecord.storageEnable" value and verify it is set to "true".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.auditRecord.storageEnable

If the "Syslog.global.auditRecord.storageEnable" setting is not set to "true", this is a finding.

Fix Text

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Click "Edit". Select the "Syslog.global.auditRecord.storageEnable" value and configure it to "true".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.auditRecord.storageEnable | Set-AdvancedSetting -Value "true"