STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 1 hour ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to F5 BIG-IP TMOS VPN Security Technical Implementation Guide

V-266284

CAT II (Medium)

The F5 BIG-IP appliance IPsec VPN must renegotiate the IKE Phase 2 security association after eight hours or less.

Rule ID

SV-266284r1024759_rule

STIG

F5 BIG-IP TMOS VPN Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-002038

Discussion

When a VPN gateway creates an IPsec Security Association (SA), resources must be allocated to maintain the SA. These resources are wasted during periods of IPsec endpoint inactivity, which could result in the gateway’s inability to create new SAs for other endpoints, thereby preventing new sessions from connecting. The Internet Key Exchange (IKE) idle timeout may also be set to allow SAs associated with inactive endpoints to be deleted before the SA lifetime has expired, although this setting is not recommended at this time. The value of one hour or less is a common best practice.

Check Content

From the BIG-IP GUI:
1. Network.
2. IPsec.
3. IPsec Policies.
4. Click on the name of the IPsec Policy.
5. Verify that the value for "Lifetime" under "IKE Phase 2" is set to 480 minutes or less.

If the BIG-IP appliance is not configured to renegotiate the security association after 8 hours or less, this is a finding.

Fix Text

From the BIG-IP GUI:
1. Network.
2. IPsec.
3. IPsec Policies.
4. Click on the name of the IPsec Policy.
5. Configure the value for "Lifetime" under "IKE Phase 2" to 480 minutes or less.
6. Click "Update".