STIGhubSTIGhub
STIGsRMF ControlsCompare

STIGhub

A free tool to search and browse the entire DISA STIG library. Saves up to 75% in security compliance research time.

Navigation

  • Browse STIGs
  • Search
  • RMF Controls
  • Compare Versions

Resources

  • About
  • Release Notes
  • VPAT
  • DISA STIG Library
STIGs updated 2 hours ago
Powered by Pylon
© 2026 Beacon Cloud Solutions, Inc. All rights reserved.
← Back to Arista MLS EOS 4.2x Router Security Technical Implementation Guide

V-256058

CAT II (Medium)

The Arista router must not be configured to use IPv6 Site Local Unicast addresses.

Rule ID

SV-256058r882516_rule

STIG

Arista MLS EOS 4.2x Router Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-000366

Discussion

As currently defined, site local addresses are ambiguous and can be present in multiple sites. The address itself does not contain any indication of the site to which it belongs. The use of site-local addresses has the potential to adversely affect network security through leaks, ambiguity, and potential misrouting as documented in section 2 of RFC3879. RFC3879 formally deprecates the IPv6 site-local unicast prefix FEC0::/10 as defined in RFC3513.

Check Content

Review the Arista router configuration to ensure FEC0::/10 IP addresses are not defined. 

Step 1: Verify that FECO::/10 IPv6 addresses are not configured.

interface ethernet 3
 no routerport 
 ipv6 address FD6D:8D64:AF0C:2::/64

If IPv6 Site Local Unicast addresses are defined, this is a finding.

Fix Text

Configure the Arista router using authorized IPv6 addresses.

Step 1: Configure the interface with IPv6 address.

LEAF-1A(config-if-Et3)#interface ethernet 3
LEAF-1A(config-if-Et3)#no routerport 
LEAF-1A(config-if-Et3)#ipv6 address FD6D:8D64:AF0C:2::/64